Hiace tough, flexible and hard working



      


2500 D4D (75kW) auto 2/8pl. / 5d.

2500 D4D (75kW) 2/8pl. / 4d.

2700 Petrol (105kW) 2/8pl. / 4d.
Engine
Engine Type 2.5 D-4D (2KD-HI) 2.5 D-4D (2KD-LO) 2.7 (3RZ-FE)
Number of cylinders 4 in line 4 in line 4 in line
Valve mechanism 16 valve DOHC Belt & Gear drive 16 valve DOHC Belt & Gear drive 16 valve DOHC Chain drive
Bore x Stroke (mm) 92.0 x 93.8 92.0 x 93.8 95.0 x 95.0
Compression ratio 18.5:1 18.5:1 9.5:1
Displacement (cc) 2494 2494 2694
Maximum output (kW/rpm) 75/3600 65/3800 106/4800
Maximum output (DIN hp/rpm) 102/3600 88/3800 144/4800
Maximum torque (Nm/rpm) 260/1600-2400 192/1200-3000 224/3600
Fuel Injection System Direct injection with common rail Direct injection with common rail Electronic fuel injection
Transmission
Gearbox 4 A/T 5 M/T 5 M/T
Transmission type 2WD 2WD 2WD
Performance
Maximum speed (km/h) 145 140 170
Acceleration 0-100 km/h 24.1 30.5 17.0
Acceleration 0-400 m 22.3 23.8 20.4
Drag coefficient 0.36 0.36 0.36
Fuel consumption
Extra urban conditions L/100km (93/116/EEC) 8.0 7.5 9.8
Urban conditions L/100km (93/116/EEC) 11.6 11.1 16.6
Combined L/100 km (93/116/EEC) 9.3 8.8 12.3
CO² emissions (g/km) 248 234 292
Fuel tank capacity (l) 75 75 75
Nitrogen Oxides, NOx (g/km) 0.70 0.62 0.06
Brakes
Brake type - Front Ventilated discs Ventilated discs Ventilated discs
Brake type - Rear Drums Drums Drums
Chassis
Suspension type - Front Double wishbone, torsion bar spring with stabiliser bar Double wishbone, torsion bar spring with stabiliser bar Double wishbone, torsion bar spring with stabiliser bar
Suspension type - Rear Semi trailing arm, coil spring Semi trailing arm, coil spring Semi trailing arm, coil spring
Number of doors 4 4 4
Number of seats - 2/8 2/8
Load Capacity
Kerb weight (kg) 1800 1785 1700
Gross vehicle weight (kg) 2600 2600 2550
Towing Capacity (kg) with/without brakes 2000 2000 1800
Payload (kg) 800 815 850
Trunk capacity (l) 8Pl+1.2 8Pl+1.2 8Pl+1.2
Deck inside length (mm) 545 545 545
Deck inside width (mm) 1570 1570 1570
Deck inside height (mm) 1405 1405 1405
Dimensions
Overall length (mm) 4715 4715 4715
Overall width (mm) 1800 1800 1800
Overall height (mm) 1985 1985 1985
Wheelbase (mm) 2985 2985 2985
Tread - Front (mm) 1560 1560 1560
Tread - Rear (mm) 1540 1540 1540
Minimum turning radius (m) 5.5 5.5 5.5

Details of specifications and equipment provided here are subject to local conditions and requirements and may, therefore, vary from models available in your area. Please enquire at your local dealer for details on your local specification and equipment.
Printed on dinsdag 26 april 2011

CSS is deactivated in the browser